Black Landfill HDPE Geomembrane Low Permeable Synthetic Membrane
Textured Geomembrane Liner is the impermeable Geomembrane and
geotechnical engineering materials which is widely used for solid
waste containment, mining and water containment applications.
Textured Geomembrane Liner is made of finest quality high density
polyethylene (HDPE) with specially formulated, virgin polyethylene
resin, combined with specified quantity carbon black, antioxidant,
anti-aging agent and UV resistance components. Textured Geomembrane
Liner features super strength, good ductility, high anti-seepage
ability, strong chemical stability, low product cost and easy
installation and longer service life, etc. Compared with
traditional concrete, asphalt and compacted clay, Textured
Geomembrane Liner has proven to be far more cost effective,
environmentally safe, excellent durable, chemically resistant, fast
deployment and easy transportation. Textured Geomembrane Liner is
widely used across a variety of industries including waste, water,
aquaculture, mining, power plant, industrial and civil engineering,
HDPE geomembranes are the preferred products for lining projects
requiring low permeability, exceptional chemical and ultraviolet
resistance properties, which makes them extremely cost-effective
for many applications, such as: Solid Waste Landfills, Hazardous
Waste Landfills and C & D Landfills, Animal Waste Containment,
Power Plants, Aquaculture, Concrete Tank Liners.
|HDPE Geomembrane Quick detail|
|Place of Origin:||China||Thickness:||0.2mm~3mm|
|Material:||HDPE||Applications:||Pond Liner/Landfill Liner/Lagoon Liner|
MINIMUM AVERAGE VALUE
ASTM D 5199
ASTM D 1505
ASTM D 638
ASTM D 638
ASTM D 638
ASTM D 638
ASTM D 1004
ASTM D 4833
Stress Crack Resistance
ASTM D 5397
Carbon Black Content
ASTM D 1603
Water Vapour Permeability
ASTM D 1204
- The seaming will be done vertically on the slope.
- The number of seams will be minimized on corners or odd-shapes. A
maximum of 3 rolls can be welded together (using a T-joint
- No horizontal seams near the bottom of a slope or any high stress
- To assist with vertical welding, panels are visibly marked with a
line 140 mm from the outside edge of the material. With a double
wedge weld, the overlap should be wider than the weld by at least
10 mm, and 50 mm with an extrusion weld.
- The overlaps must be dry and clear when welding begins.
- Trial seams are done at the beginning, middle and the end of each
seaming period. The trial seams must always be done under the same
conditions as the geomembrane seam is done. The trial seams must be
1 m in length and 0.3 in width.
- Using a field tensiometer, 5 welding samples will be done. The
samples will be 2.5 cm wide and 30 cm long. If any of the samples
fail – the entire operation will have to be repeated.
- If excessive wrinkling occurs (fish mouths) then the edges of the
wrinkling is cut in order to create a flat overlap. The places that
were cut will then be seamed. If the cutting caused an issue with
the length of the overlap than a round or oval patch will be placed
that must extend 15 cm from all sides.Professional Geomembrane
Product Package and Storage:
- HDPE geomembrane is supplied on cardboard cores and wrapped in plastic fabric
- All materials are stored indoors to protect them from exposure to
HDPE Geomembrane Loading Capacity
HDPE Geomembrane liners typically offer superior tensile strength and stiffness and
are resistant to chemicals and puncture. These geomembranes are
safe for potable water containment and can be fabricated into
panels of up to one acre in size.
|MODEL||ROLL SIZE||QTY 1*40HQ||SQM 1*40HQ||REMARKS|
|HGM20||7M*525M||38 ROLLS||139650 M2|
|HGM30||7M*350M||38 ROLLS||93100 M2|
|HGM50||7M*420M||19 ROLLS||55860 M2|
|HGM75||7M*280M||19 ROLLS||37240 M2|
|HGM100||7M*210M||19 ROLLS||27930 M2|
|HGM150||7M*140M||19 ROLLS||18620 M2|
|HGM200||7M*105M||19 ROLLS||13965 M2|
Q1: Are you factory or trading company?
We are Reliable & Capable Efactory, with our HDPE geomembrane
facilities in Dezhou, Shandong, China.
Welcome to visit our factory!
Q2: What Information should I let you know If I want to get a
1. Specification of product
2. QTY You need
3. Delivery Time
Q3: How does your factory do related quality control?
Quality is the No.1 priority. We attach great importance to quality
control from the very beginning of manufacturing. Our factory has
gained SGS, ISO, ROHS authentication.
Q4: Can you send us samples ?
Yes, samples are free, but freight will paid by you.